Description
- Temperature: 355ºF / Time: 55 – 65 seconds / Pressure: medium/firm
- Place teflon sheet or protective paper on press
- A teflon sheet/protective paper MUST be placed inside the bag or the print can bleed through
- Use a lint roller to remove any excess fibers from the surface of the cover
- Pre-press for 5 seconds
- Place transfer face down, tape into position
- Either leave the vinyl pieces around the metal grommets at the bottom of the bag out of the press, or cover with heat tape for protection.
- For best results remove cord or have it outside the press. The vinyl cord WILL melt.
- Cover with teflon sheet or protective paper
- Press at 355ºF for 55 – 60 seconds using medium/firm pressure
- Remove teflon sheets/protective paper, then remove transfer
- Cool on a clean surface
